Urine Controls
Your Professional Urine Controls Supplier!
Hangzhou Bosure Biotech. Co., Ltd. is an innovative technology company specializing in the research and development, manufacturing, sales, and service of in vitro diagnostic reagents and medical devices. The company has applied for a number of patents in the development of innovative products, and is one of the few suppliers. Our products include Hemoglobin Test, Lipid Test, Urinalysis Test, Rapid Tests, Alcohol Test, Urine Adulteration Test, etc.
Specification
|
Store Temperature |
2-8℃ |
|
Shelf life |
24 months |
|
Open bottle shelf life |
3 months |
|
Analytes |
Ascorbic acid, Glucose, Bilirubin, Ketone (Acetoacetic acid), Specific Gravity, Blood, pH, Protein, Urobilinogen, Nitrite, Leukocytes, Creatinine, Albumin and Calcium. |
Consolidated menu of analytes
Contains multiple analytes, including common urinalysis markers for monitoring urinalysis testing.
Patient-like material
Liquid, human urine-based control.
Multiple levels
Bilevel control offers increased assay range monitoring.
Extensive value assignment listings
Allows for use of a wide range of testing methods, including manual or automated methods to helpcompare data from multiple test platforms and improve confidence in patient test results.
Ease of use
Ready-to-use liquid state offers the convenience of not needing to reconstitute.
Long shelf life
Reduces crossover studies which helps simplify workflow.
Urine Controls Test Method
Preparation: Ensure the liquid urine control is stored according to the manufacturer's guidelines, typically at 2–8°C (36–46°F). Do not freeze unless specified. Before use, allow the control to reach room temperature (20–25°C) to ensure accurate results. Gently swirl or invert the bottle several times to ensure homogeneity. Avoid vigorous shaking to prevent foam formation.
Application Methods: There are two common methods for applying liquid urine controls: Use a dropper to apply the control solution directly onto each reagent pad of the test strip. Ensure each pad is thoroughly saturated without over-saturating. Pour the control solution into a clean container. Dip the test strip into the solution, ensuring all reagent pads are immersed. Remove the strip promptly to prevent leaching of reagents.
Reading and Recording Results: Follow the manufacturer's recommended timing for reading results after application. Compare the color changes on the reagent pads to the provided color chart or use an automated analyzer if available. Record the results, including date, time, lot numbers of the control and test strips, and any observations.
Post-Test Handling: After use, promptly recap the control bottle and return it to the recommended storage conditions. Opened controls are typically stable for a specified period, such as 30 days at room temperature or until the expiration date if refrigerated. Avoid touching the dropper tip or pouring spout to any surfaces to prevent contamination.
Troubleshooting: If control results fall outside the expected range, consider the following steps: Verify that the control and test strips are within their expiration dates. Ensure proper storage and handling procedures were followed.Repeat the test with a new control or test strip.

● For in vitro diagnostic use only. Do not use after the expiration date.
● All materials should be considered potentially hazardous and handled in the same manner as an infectious agent.
● Discard if there is excessive turbidity or evidence of microbial contamination.
● The used materials should be discarded according to local regulations after testing.
● This product is not intended for use as a standard
● The use of quality control materials is an important part of good laboratory practices.
● Quality control materials are an objective method of assessing techniques or practices in use
● Quality control materials should be used in accordance with local, state and/or federal regulations or accreditation requirements.
Urine Controls Storage
● Store and ship at 36-46°F (2-8°C). Do not freeze.
● Unopened controls are stable until the expiration date printed on the bottle label when stored at 36-46°F (2-8°C).
● All analytes are stable for 30 days at 59-86°F (15-30°C) or until the expiration date at 36-46°F (2-8°C).
● Once opened store with the cap on tightly.
Packaging and Shipping
|
Packaging |
Standard Packaging |
|
Transportation methods |
Road transport, rail transport, sea transport, air transport |
Our Certificate








FAQ
We're well-known as one of the leading urine controls manufacturers and suppliers in China. Please feel free to wholesale bulk cheap urine controls from our factory. If you have any enquiry about cooperation, please feel free to email us.
Mas Urinalysis Controls, Urine Control, Quality Control for Urine Dipsticks





